Click Image for Gallery
Stabletex® Stabilisation, Drainage and Separation Membrane
Stabletex® is a high quality thermally bonded membrane that is well suited to applications that will require good drainage, separation of different subsoil and aggregate types or require stabilisation.
Applications
- Block paviour drives
- Car parking areas & driveways
- Stabilisation under grids
- Land drains under heavy traffic areas
- Attenuation & harvesting tanks
- Stabilisation using a vibrating roller
- Under wet pour / safety mats
- Horse menage between Type 1 & top dressing
- Tennis courts
Benefits
- High porosity
- Allows air & water to permeate
- Reduces depth of sub-base
- Rougher surface so less slip
- Follows ground contours better
- Variety of sizes to minimise wastage
- Calendered both sides for extra strength
Useful Information for Stabletex® Membrane
- Overlap 100/120mm at joins
- Must be covered within 48 hours of laying
- Edges are best secured by ‘spitting’ or ‘trenching’100/150mm vertically into the soil
- For heavy vehicular traffic use Hypex 100
- Stabilise aggregates on a slope using G-grids
- Ensure aggregates are well washed to remove seeds
- Turn up edges with patios and driveways like a tray to lock in bedding sand
- Use large clean aggregate 20-40mm in drainage systems so less restriction for water flow
- Stabletex is not a weed control membrane
- Please request specific installation recommendations for your application
Roll Width | Product Code | Roll Size | Roll m2 |
2.25m | 11522100 | 2.25m x 100m | 225 |
4.50m | 11545100 | 4.50m x 100m | 450 |